Exterior Coatings

Below is a list of our products in this category. To view the Material Safety Data Sheet or the Product Data Sheet, please click on the corresponding link.

#IP 57 Strip-Easy All Natural Paint & Varnish Remover

IP 57

NewSTRIP-EASY All Natural Paint & Varnish Remover is a radically new type of paint remover that is non-hazardous making it safe and easy to use. It contains no Methylene Chloride, N-Methyl Pyrrolidine, or caustics which make it environmentally friendly, biodegradable and practical for most stripping applications. Its special formulation is designed to remove multiple layers of various types of coatings, paint and varnishes, solvent and water-based, stains, lacquers, urethanes epoxies and more. It may be applied to virtually any substrate without damaging the substrate nor will it harm the environment or be detrimental to animals and humans. It has no harmful odors or fumes, zero VOC’s, is pH neutral and is excellent for both interior and exterior use.

  • 100% Biodegradable
  • No Harmful Odor
  • Non-Hazardous
  • Environmentally Safe
  • No TAP’s or HAP’s
  • Removes up to 15 Layers
  • Zero VOC's
  • Easy To Apply
#IP10-16 Red Oxide Alkyd Shop Coat Primer
IP-10-16

Red Oxide Shop Coat Metal Primer is a solvent-based alkyd specially formulated for shop environments. It is designed to provide corrosion protection during project fabrication and storage. It is easy to apply, spreads evenly, resists sagging, has excellent adhesion qualities, resists oils, salt air, and mild chemical fumes. For Interior & Exterior Uses!

  • Structural Steel
  • Ferrous Metal
  • Aluminum
  • Machinery
  • Metal Railings
  • Easy to Apply
  • Rust Inhibitive
  • Lead Free
  • Excellent Adhesion
  • Abrasion Resistant
#IP100 Great White Elastomeric Roof Coating

IP-100

Great White 100% Acrylic Elastomeric Roof Coating is a premium quality, fluid applied, elastomeric roof coating manufactured using advanced acrylic polymer technology. When applied properly, the fully adhered seamless membrane exhibits excellent adhesion, strength, flexibility, durability and water resistance. This product is excellent for use on sloped, flat, and ponding water roofs.

  • 100% Acrylic Formula
  • UV Resistant
  • Excellent Adhesion
  • Excellent Flexibility
  • Excellent Durability
  • Resists Dirt Pick-Up
  • Mildew Resistant
  • VOC Compliant
  • Product Versatility
  • Applies Easily
#IP104 Clean-Kote Elastomeric Roof Coat

IP-104

Clean-Kote 100% Acrylic Elastomeric Roof Coating is a premium quality, fluid applied, elastomeric roof coating specifically formulated for safe use with Cistern/Collection tank systems. When applied properly, the fully adhered seamless membrane exhibits excellent adhesion, strength, flexibility, durability and water resistance.

  • 100% Acrylic Formula
  • Moisture Resistant
  • UV Resistant
  • Excellent Adhesion
  • Excellent Flexibility
  • Excellent Durability
  • Mildew Resistant
  • VOC Compliant
  • Low Odor
  • Easy To Apply
#IP107 Great White Ceramic Thermal Elastomeric Roof Coating

IPC-107

Great White Ceramic Thermal Elastomeric Roof Coating is a premium quality, fluid applied, elastomeric roof coating manufactured using advanced acrylic polymer technology. When applied properly, the fully adhered seamless membrane exhibits excellent adhesion, strength, flexibility, durability and water resistance. This product is excellent for use on sloped, flat, and ponding water roofs.

  • 100% Acrylic Formula
  • Moisture Resistant
  • UV Resistant
  • Excellent Adhesion
  • VOC Compliant
  • Excellent Flexibility
  • Mildew Resistant
  • Excellent Durability
#IP110 Polar Flat Premium Vinyl-Acrylic Roof Paint
IP-110

Polar Premium Vinyl Acrylic Flat Roof Paint is a premium quality, vinyl acrylic latex emulsion coating that is specially formulated to provide superior durability, UV resistance, and mildew and algae resistance. Easy to apply, it provides superior coverage, adhesion, and product versatility.

 

Polar Roof Paint is also excellent for application to properly prepared trim, drip edges, fascia, gutters, awnings, shutters, and a variety of other paintable substrates. Available colors: White, Terracotta, Spanish Red, Venezuelan Tile.

 

Recommended Uses: Polar Premium Vinyl Acrylic Flat Roof Paint may be used on the following properly prepared roof substrates:

  • Concrete Tile
  • Gravel
  • Asphalt Shingle
  • Metal Previously Painted
  • High UV Reflectance
  • Mildew & Algae Resistant
  • Superior Durability
  • Superior Coverage & Adhesion
  • Low VOC
  • Product Versatility
  • Easy To Apply
#IP120 Polar Satin Premium Vinyl-Acrylic Roof Paint
IP-120

Polar Premium Vinyl Acrylic Satin-Gloss Roof Paint is a premium quality, vinyl acrylic latex emulsion coating that is specially formulated to provide superior durability, UV resistance, and mildew and algae resistance. Easy to apply, it provides superior coverage, adhesion, and product versatility.

 

Polar Roof Paint is also excellent for application to properly prepared trim, drip edges, fascia, gutters, awnings, shutters, and a variety of other paintable substrates. Available colors: White, Terracotta, Spanish Red, Venezuelan Tile.

 

Recommended Uses: Polar Premium Vinyl Acrylic Satin-Gloss Roof Paint may be used on the following properly prepared substrates:

  • Concrete Tile
  • Gravel
  • Asphalt Shingle
  • Metal Previously Painted
  • High UV Reflectance
  • Mildew & Algae Resistant
  • Superior Durability
  • Superior Coverage & Adhesion
  • Low VOC
  • Product Versatility
  • Easy To Apply
#IP13-98 Gray Alkyd Shop Primer
IP-10-16

Gray Alkyd Shop Coat Metal Primer is a solvent-based alkyd specially formulated for shop environments. It is designed to provide corrosion protection during project fabrication and storage. It is easy to apply, spreads evenly, resists sagging, has excellent adhesion qualities, resists oils, salt air, and mild chemical fumes. For Interior & Exterior uses!

  • Structural Steel
  • Ferrous Metal
  • Aluminum
  • Machinery
  • Metal Railings
  • Easy to Apply
  • Rust Inhibitive
  • Lead Free
  • Excellent Adhesion
  • Abrasion Resistant
#IP130 Alpine Premium 100% Acrylic Flat Roof Paint
IP-130

Alpine Premium 100% Acrylic Flat Roof Paint is a premium quality 100% acrylic latex emulsion roof coating that exhibits exceptional adhesion, durability, color and gloss retention, and mildew and algae resistance. For Exterior Use Only!

 

Alpine Roof Paint is also excellent for application to properly prepared trim, drip edges, fascia, gutters, awnings, shutters, and a variety of other paintable substrates. Available in White and Tinting Bases

 

Recommended Uses: Alpine Premium 100% Acrylic Flat Roof Paint may be easily applied to the following properly prepared substrates:

  • Concrete Tile
  • Gravel
  • Asphalt Shingle
  • Metal
  • Previously Painted
  • 100% Acrylic Formula
  • Excellent Coverage
  • Excellent Adhesion
  • Excellent Durability
  • Mildew & Algae Resistant
  • Low VOC
  • Excellent UV Resistance
  • Excellent Product Versatility
  • Easy To Apply
#IP140 Alpine Premium 100% Acrylic Semi-Gloss Roof Paint
IP-140

Alpine Premium 100% Acrylic Semi-Gloss Roof Paint is a premium quality 100% acrylic latex emulsion roof coating that exhibits exceptional adhesion, durability, color and gloss retention, and mildew and algae resistance. For Exterior Use Only!

 

Alpine Roof Paint is also excellent for application to properly prepared trim, drip edges, fascia, gutters, awnings, shutters, and a variety of other paintable substrates. Available in White and Tinting Bases.

 

Recommended Uses: Alpine Premium 100% Acrylic Semi-Gloss Roof Paint may be used on the following properly prepared substrates:

  • Concrete Tile
  • Gravel
  • Asphalt Shingle
  • Metal
  • Previously Painted
  • 100% Acrylic Formula
  • Excellent Coverage
  • Excellent Adhesion
  • Excellent Durability
  • Mildew & Algae Resistant
  • Low VOC
  • Excellent UV Resistance
  • Excellent Product Versatility
  • Easy To Apply
#IP150 Alpine Premium 100% Acrylic High-Gloss Roof Paint
IP-150

Alpine Premium 100% Acrylic High-Gloss Roof Paint is a premium quality 100% acrylic latex emulsion roof coating that exhibits exceptional adhesion, durability, color and gloss retention, and mildew and algae resistance.

 

Alpine Roof Paint is also excellent for application to properly prepared trim, drip edges, fascia, gutters, awnings, shutters, and a variety of other paintable substrates. Available in White and Tinting Bases.

 

Recommended Uses: Alpine Premium 100% Acrylic High-Gloss Roof Paint may be used on the following properly prepared substrates:

  • Concrete Tile
  • Gravel
  • Asphalt Shingle
  • Metal
  • Previously Painted
  • 100% Acrylic Formula
  • Excellent Coverage
  • Excellent Adhesion
  • Excellent Durability
  • Mildew & Algae Resistant
  • Low VOC
  • Excellent UV Resistance
  • Excellent Product Versatility
  • Easy To Apply
#IP192 Alkali Resisant White Primer For Hot Stucco

IP-192

Infiniti’s 100% Acrylic Alkali Resistant Masonry Primer is a 100% acrylic primer specially formulated to resist “alkali burn” commonly associated with new cementitious substrates. Its special formulation provides excellent coverage, adhesion, low odor, and may be applied to surfaces with a PH level as high as 11. It dries fast, is mildew resistant, is non-yellowing, and has excellent priming and sealing properties. May be top-coated with both water and alkyd/oil-based finish coatings.

  • 100% Acrylic Formula
  • Excellent Coverge
  • Primes & Seals
  • Bonds To Glossy Surfaces
  • Improves Adhesion
  • Sands Easiliy
  • Easy to Apply
  • Low VOC
#IP194 Alkali Resistant White Sealer For Hot Stucco
IP-194

Alkali Resistant White 100% Acrylic Primer-Sealer is an acrylic emulsion primer sealer specifically designed to bind oxidized paint residue - (chalk), as well as other forms of small particles of foreign debris to the substrate. Easy to apply, it provides excellent adhesion and its special formulation penetrates and seals bare masonry surfaces allowing specified paint coatings to be applied more smoothly.

  • Masonry
  • Stucco
  • Concrete
  • Brick
  • Cement Block
  • Cement Board
  • Previously Painted Surfaces
  • Acrylic Formula
  • Excellent Adhesion
  • Promotes Finish Coat Adhesion
  • Reduces Surface Porosity
  • Low VOC
  • Excellent Product Versatility
  • Soap & Water Clean-Up
  • Alkali Resistant Formula
#IP196 Alkali Resistant Clear Sealer For Hot Stucco
IP-196

Alkali Resistant Clear 100% Acrylic Primer-Sealer is an acrylic emulsion primer sealer specifically designed to bind oxidized paint residue - (chalk), as well as other forms of small particles of foreign debris to the substrate. Easy to apply, it provides excellent adhesion and its special formulation penetrates and seals bare masonry surfaces allowing specified paint coatings to be applied more smoothly.

  • Masonry
  • Stucco
  • Concrete
  • Brick
  • Cement Block
  • Cement Board
  • Previously Painted Surfaces
  • Acrylic Formula
  • Excellent Adhesion
  • Promotes Finish Coat Adhesion
  • Reduces Surface Porosity
  • Low VOC
  • Excellent Product Versatility
  • Soap & Water Clean-Up
  • Alkali Resistant Formula
#IP198 Acrylic Surface Conditioner
IP-198

Acrylic Surface Conditioner 100% Acrylic Clear Primer-Sealer is an acrylic emulsion primer sealer specifically designed to bind oxidized paint residue - (chalk), as well as other forms of small particles of foreign debris to the substrate. Easy to apply, it provides excellent adhesion and its special formulation penetrates and seals bare masonry surfaces allowing specified paint coatings to be applied more smoothly.

  • Masonry
  • Stucco
  • Concrete
  • Brick
  • Cement Block
  • Cement Board
  • Previously Painted Surfaces
  • Acrylic Formula
  • Excellent Adhesion
  • Promotes Finish Coat Adhesion
  • Reduces Surface Porosity
  • Low VOC
  • Excellent Product Versatility
  • Soap & Water Clean-Up
#IP204 Chalk-Bond Plus Primer/Sealer (3-1 Concentrate)
IP-204

Chalk-Bond + Clear 100% Acrylic Primer-Sealer Concentrate is a water reducible acrylic emulsion primer sealer specifically designed to bind oxidized paint residue - (chalk), as well as other forms of small particles of foreign debris to the substrate. Easy to apply, it provides excellent adhesion and its special formulation penetrates and seals bare masonry surfaces allowing specified paint coatings to be applied more smoothly. Concentrated - 1 gallon makes 4 gallons mixed!

  • Masonry
  • Stucco
  • Concrete
  • Brick
  • Cement Block
  • Cement Board
  • Previously Painted Surfaces
  • Acrylic Formula
  • Excellent Adhesion
  • Promotes Finish Coat Adhesion
  • Reduces Surface Porosity
  • Low VOC
  • Excellent Product Versatility
  • Soap & Water Clean-Up
#IP205 Acrylic Metal Roof Primer
IP-205

Metal Roof Primer is a specially formulated 100% acrylic primer specifically designed for application to a variety of metal surfaces, as well as other paintable surfaces. It provides excellent coverage, adhesion and durability, and is easy to apply. It is mildew and algae resistant, offers excellent rust resistance, and is low VOC.

  • Masonry
  • Stucco
  • Concrete
  • Brick
  • Cement Block
  • Cement Board
  • Previously Painted Surfaces
  • Acrylic Formula
  • Excellent Adhesion
  • Promotes Finish Coat Adhesion
  • Reduces Surface Porosity
  • Low VOC
  • Excellent Product Versatility
  • Soap & Water Clean-Up
#IP248 Oil & Grease Remover
IP-220

Is unlike any industrial degreaser on the market today. Its superior degreasing power comes from a patented ingredient that safely lifts grease from any surface without the use of solvents. As such, it easily removes petroleum-based oils, vegetable and animal fats, along with dirt, protein, soils and more. Oil and Grease Remover encapsulates each hyrocarbon molecule, effectively lifting it away from the surface. It's concentrated formula means that a little goes a long way, which makes it easy to use on a variety of surfaces, and it is non-toxic.

  • Nuetral pH Formula
  • Non-Solvent
  • Non-Toxic
  • Cuts Animal Fats
  • Lifts Grease & Oils
  • Cuts Vegetable Fats
  • Low Foam
  • NSF Certified
  • Concentrated
  • Easy To Use
#IP249 Masonry Cleaner & Efflorescence Remover

IP-220

Is a specially formulated 100% acid free masonry cleaner and efflorescence remover. It is not only the world's strongest masonry cleaner, it is also the safest. Independent test confirms that its synthetic acid formula dissolves more calcium carbonate and efflorescence than muriatic, (hydrochloric) or phosphoric acid base cleaners, which are also harmful. It will safely and quickly clean pavers, brick, concrete, river rock, architectural concrete and retainer walls while dissolving all signs efflorescence. It is color safe, non-fuming and is safe for use in and around food processing and equipment areas. It is 100% biodegradable, water soluble, non-flammable, non-toxic and easy to use.

  • 100% Acid Free Formula
  • Removes Efflorescence
  • Non-Corrosive
  • Stronger than Muriatic
  • Non-Fuming
  • Non-D.O.T Regulated
  • 100% Biodegradable
  • Safe on Glass
  • Safe on Plants & Skin
  • Non-Toxic
#IP250 Stone Age Paver & Concrete Sealer (Original)
IP-250

Stone Age Brick Paver & Concrete Sealer is a premium quality, solvent borne acrylic sealer that is designed to penetrate and seal bare cementitious substrates. Its attractive gloss finish not only enhances and darkens unsealed pavers to give them a rich "Wet Look" finish, but also provides a superior toughness and durability that protects against the penetration of moisture, oils, grease stains, and other damaging or discoloring agents.

 

Note: Do not use on Epoxy Chattahoochee or other solvent sensitive surfaces.

 

Caution: May not be compatible with all previously applied coatings. Apply a small test area to ensure product compatibility.

  • Brick Pavers
  • Stamped Concrete
  • Brick
  • Driveways
  • Decorative Stone
  • Floors
  • Concrete Chattahoochee
  • Garage Floors
  • Walkways
  • Patios
  • Excellent Penetration
  • Excellent Sealing
  • Waterproofs
  • Excellent Adhesion
  • Excellent Toughness & Durability
  • Resists Hot Tire Pick-Up
  • Resists Chemical Staining
  • Non-Yellowing
  • Resists UV Light
  • Easy To Apply
#IP250WB Stone Age High Def WB Paver Sealer
IP-250

A VOC compliant, one-part water-borne polymer protective coating design for application to a variety masonry surfaces, such as, concrete pavers, barrel roof tiles, slate, etc. Formulated from new “Bio-Echo” plant polymers technologies, it enables the pavers to be sealed while still damp! It is formulated for maximum water blush, or haze resistance while providing a satin/semi-gloss finish that penetrates the surface, seals, and strengthens and binds the sand between paver joints, thus limiting movement, and retarding the growth of weeds.

  • Water-Borne Plant Polymer
  • Joint Stabilizer
  • Penetrates & Seals
  • Excellent Coverage
  • Excellent Durability
  • Enhances Color
  • Resists Chipping
  • Resists Cracking & Peeling
  • Smooth Satin Finish
  • Easy To Apply
#IP252 Stone Age Paver & Concrete Sealer (High Solids)
IP-250

Stone Age High Solids Brick Paver & Concrete Sealer is a premium quality, solvent borne acrylic sealer that is designed to penetrate and seal bare cementitious substrates. Its attractive gloss finish not only enhances and darkens unsealed pavers to give them a rich "Wet Look" finish, but also provides a superior toughness and durability that protects against the penetration of moisture, oils, grease stains, and other damaging or discoloring agents.

 

NOTE: Not recommended as a re-seal on previously sealed surfaces. For re-seal type applications, it is recommended to use Infiniti’s #255, Stone Age Re-Seal Brick Paver & Concrete Sealer.

 

Caution: May not be compatible with all previously applied coatings. Apply a small test area to ensure product compatibility.

  • Brick Pavers
  • Stamped Concrete
  • Brick
  • Driveways
  • Decorative Stone
  • Floors
  • Concrete Chattahoochee
  • Garage Floors
  • Walkways
  • Patios
  • Excellent Penetration
  • Sealing
  • Waterproofs
  • Excellent Adhesion
  • Excellent Toughness & Durability
  • Resists Hot Tire Pick-Up
  • Resists Chemical Staining
  • Non-Yellowing
  • Resists UV Light
  • Easy To Apply
#IP255 Stone Age Paver & Concrete Re-Sealer
IP-255

Stone Age Re-Seal Brick Paver & Concrete Sealer is a specially formulated solvent borne acrylic sealer designed for application to previously sealed brick pavers and cementitious substrates which have faded or lost their luster over time. Formulated to penetrate and re-seal, it enhances the pavers to give them that same rich "Wet Look" finish. It provides a superior toughness and durability that protects against the penetration of moisture, oils, grease stains, and other damaging or discoloring agents. For Exterior Use Only!

 

Note: Do not use on Epoxy Chattahoochee or other solvent sensitive surfaces.

 

Caution: May not be compatible with all previously applied coatings. Apply a small test area to ensure product compatibility.

  • Brick Pavers
  • Stamped Concrete
  • Brick
  • Driveways
  • Decorative Stone
  • Floors
  • Concrete Chattahoochee
  • Garage Floors
  • Walkways and Patios
  • Excellent Penetration
  • Excellent Sealing
  • Excellent Adhesion
  • Excellent Toughness & Durability
  • Resists Hot Tire Pick-Up
  • Resists Chemical Staining
  • Non-Yellowing
  • Easy To Apply
#IP261 Stone Age Concrete Stain

IP-261

Stone Age Concrete Stain is a durable concrete stain that, when properly applied, penetrates deep into the cementitious substrate to seal and waterproof the surface. It is fast drying, provides superior wear resistance, weatherability and protects the surface from excessive powdering, staining and water intrusion. It applies easily and may be applied over existing concrete stains and sealers. Not recommended for previously painted surfaces. COLORS: White, Clear, Deeptone & Ultra-Deeptone Tint Bases, and 10 Stock Colors.

 

Special Note: When applying lighter colors to driveways, carport and garage floors, tire tracking may occur. Finish may become slippery when wet. The use of a non-skid additive, such as Infiniti’s Stone Age Non-Skid Additive, is recommended to enhance anti-slip safety.

  • Patios
  • Walkways
  • Driveways
  • Garage Floors
  • Balconies
  • Pool Decks
  • Tennis Courts
  • Decorative Brick
  • Masonry Walls
  • Carports
  • Warehouse Floors
  • Solvent Acrylic Formula
  • Prevents Moisture Penetration
  • Resists Staining
  • Superior Wear Resistance
  • Superior Weather Resistance
  • Easy To Apply
#IP290 Latex Traffic Marking Paint
IP-290

Acrylic Traffic Paint is a premium quality, acrylic latex emulsion coating that is specially formulated to resist road oils, water and salts, which are commonly used for removing ice from roadways. It provides excellent coverage, adhesion, durability, and visibility for road ways, crosswalks, safety zones, etc.. Once applied and while still wet, specially designed glass beads may be sifted onto the coating immediately after application to obtain a more reflective value, and to improve night visibility. Formulated to meet Federal Specification TT-P-1952B for quality and performance. COLORS: White, Yellow, Blue, Black, and Red.

  • All Roadways
  • Parking Lots
  • Loading Docks
  • Crosswalks
  • Curbs
  • Factories
  • Parking Garages
  • Safety Zones
  • Airport Runways
  • Acrylic Formula
  • Excellent Coverage
  • Excellent Adhesion
  • Excellent Durability
  • Promotes Better Road Visibility
  • Resists Road Oils & Salts
  • Fast Drying
  • Resists Asphalt Bleeding
  • Low VOC
#IP42-00 Stone Age Walkway & Deck Coating
IP-42-00

Stone Age Walkway & Deck Coating is a premium quality 100% acrylic floor coating specially designed for application to properly prepared floor and deck surfaces. It provides a tough, durable low-sheen finish that resists chipping, peeling, fading, and is mildew resistant. Easy to apply, it offers excellent coverage, and may be applied to a variety of interior & exterior surfaces. COLORS: White/Pastel, Midtone, Deeptone & Ultra-Deeptone Tint Bases, and 10 Stock Colors.

 

NOTE: This finish may become slippery when wet when applied to horizontal surfaces, such as floors, patios, or any floor area exposed to moisture. The use of a non-skid additive, such as Infiniti’s Stone Age Non-Skid to ensure an anti-slip, and safe walking environment is recommended.

  • Sidewalks
  • Stairways
  • Patios
  • Balcony Decks
  • Pool Decks
  • Wood Decks
  • Concrete Floors
  • Warehouse Floors
  • Catwalks
  • Tennis Courts
  • Ramps & Loading Docks
  • 100% Acrylic Formula
  • Excellent Coverage
  • Excellent Toughness & Durability
  • Resists Chipping, Cracking & Peeling
  • Mildew Resistant
  • Smooth Low Sheen
  • Excellent Product Versatility
  • Easy To Apply
#IP44-50 Stone Age W/B Bonding Surfacer, Clear
IP-44-50

Stone Age WB Bonding Surfacer is a specially formulated modified waterborne epoxy ester sealer / surfacer designed for use on porous and some non-porous concrete substrates, such as garage and carport floors. It reinforces and penetrates the surface, thus promoting adhesion characteristics and providing a more compatible surface for the application of various latex and solvent-based floor coatings. For Interior & Exterior Use!

  • Garage & Carports
  • Patios
  • Balconies
  • Catwalks
  • Sidewalks
  • Driveways
  • Poured Concrete
  • Brick
  • Previously Painted Surfaces
  • Waterborne Epoxy Ester Formula
  • Excellent Surface Penetration
  • Applies To Non-Porous Surfaces
  • Seals Chalky Surfaces
  • Improves Adhesion Qualities
  • Eliminates Muriatic Acid Etching
  • Easy To Apply
#IP45-00 Stone Age Driveway Coating
IP-45-00

Stone Age Driveway Coating is a special 100% acrylic waterborne coating specifically designed for application to properly prepared driveways, floors and walkways. Its special formulation provides excellent hardness, durability, and weather resistance. Its smooth low sheen finish resists cracking, peeling and chipping, is mildew resistant, applies easily, and may be applied to previously painted surfaces. For Interior & Exterior Use! COLORS: White/Pastel, Midtone, Deeptone & Ultra-Deeptone Tint Bases, and 11 Stock Colors.

 

NOTE: This finish may become slippery when wet. The use of a non-skid additive, such as Infiniti’s Stone Age Non-Skid to ensure an anti-slip, and safe walking environment is recommended.

  • Driveways
  • Walkways
  • Stairways
  • Catwalks
  • Garage & Carport Floors
  • Patios
  • Pool Decks
  • Loading Docks
  • 100% Acrylic Formula
  • Excellent Hardness & Durability
  • Resists Fading
  • Resists Chipping & Peeling
  • Excellent Coverage
  • Excellent Product Versatility
  • Easy To Apply
#IP46-00 Stone Age Anti-Slip Acrylic Coating
IP-46-00

Stone Age Anti-Slip Floor Coating is a special 100% acrylic waterborne coating designed for application in areas where safety concerns are a priority. Its special formula provides an anti-slip texture finish that has excellent hardness and durability, which offers excellent wear and abrasion resistance in high foot traffic areas. Easy to apply, it has excellent coverage, resists cracking, chipping and peeling, is fade resistant, mildew resistant, and has excellent color retention.For Interior & Exterior Use! COLORS: White & 11 Stock Colors

  • Concrete Floors
  • Patios
  • Pool Decks
  • Walkways
  • Stairways
  • Loading Docks
  • Catwalks
  • Tennis Courts
  • Stadium Ramps
  • Masonry Walls
  • 100% Acrylic Formula
  • Excellent Durability
  • Excellent Wear & Abrasion Resistance
  • Excellent Coverage
  • Fade Resistance
  • Mildew Resistant
  • Product Versatility
  • Easy To Apply
#IP550 ATS-13 100% Acrylic Roof Tile Sealant
IP-550

ATS-13 100% Acrylic Pigmented Roof Tile Sealant is a premium quality, specially formulated acrylic emulsion sealant that bonds to bare masonry surfaces and properly prepared previously painted substrates. It provides excellent adhesion, and is mildew and algae resistant. Its attractive low sheen finish offers excellent weather resistance, durability, and exceptional performance.

 

Alpine Roof Paint is also excellent for application to properly prepared trim, drip edges, fascia, gutters, awnings, shutters, and a variety of other paintable substrates. Available in White and Tinting Bases.

  • Concrete Roof Tiles
  • Barrel Roof Tiles
  • Asphalt Shingles
  • Metal
  • 100% Acrylic Formula
  • Excellent Coverage & Adhesion
  • Penetrates & Bonds
  • Excellent Durability
  • Excellent Weather Resistance
  • Mildew & Algae Resistant
  • Low Odor & VOC
  • Excellent Product Versatility
  • Easy To Apply
#IP554 ATS-13 100% Acrylic Roof Tile Clear Sealant
IP-554

ATS-13C 100% Acrylic Clear Roof Tile Sealant is a premium quality acrylic emulsion clear sealer/finish that penetrates and bonds to a variety of roofing substrates, including asphalt shingles. It also demonstrates excellent adhesion to ATS-13 100% Acrylic Pigmented Roof Tile Sealant, as well as other properly prepared, previously painted surfaces. It provides an attractive satin-gloss that resists dirt, cracking, chipping, mildew, algae, alkali, is non-yellowing, low VOC, and provides excellent product versatility and is easy to apply.

  • 100% Acrylic Formula
  • Excellent Durability & Adhesion
  • Mildew & Algae Resistant
  • Alkali Resistant
  • Resists Cracking & Chipping
  • Low VOC
  • Non-Yellowing
  • Soap & Water Clean-Up
  • Easy To Apply
  • COLORS: Clear
#IP565 100% Acrylic Roof Shingle Sealer
IP-565

100% Acrylic Clear Roof Shingle Sealer is a premium quality acrylic emulsion clear sealer/finish that penetrates and bonds to a variety of roofing substrates, including asphalt shingles. It provides an attractive satin-gloss that resists dirt, cracking, chipping, mildew, algae, alkali, is non-yellowing, low VOC, and provides excellent product versatility and is easy to apply.

  • 100% Acrylic Formula
  • Excellent Durability & Adhesion
  • Mildew & Algae Resistant
  • Alkali Resistant
  • Resists Cracking & Chipping
  • Low VOC
  • Non-Yellowing
  • Excellent Product Versatility
  • Soap & Water Clean-Up
  • Easy To Apply
#IP8000 Latex Field Marking Paint
IP-8000

Latex Field Marking Paint is a concentrated heavy duty vinyl acrylic coating specifically designed for use as a line striping paint for all types of playing fields. It is non-toxic, non-irritating to eyes or skin, and will not harm grass. When properly mixed and applied, it provides crisp color distinction, and excellent coverage to dry surface grasses for lasting design effects and resistance to wear. Colors: White and 9 Factory Colors

  • Non-Toxic
  • Concentrated
  • Heavy Duty
  • Wear Resistant
  • Excellent Coverage
  • Wear Resistant
  • Non-Irritating
  • Easy To Apply
IP 4-00 Premium 100% Acrylic Satin House & Trim Paint

IP-4-00

Infiniti’s 100% Acrylic Satin House & Trim Paint is our very best 100% acrylic satin house and trim paint. Its special formulation provides excellent durability, and excellent weathering properties, as well as promoting ease of application. Product versatility allows for application to a variety of both interior and exterior surfaces, while it resists fading, chalking, dirt pick-up, cracking, blistering, and peeling. It is mildew and alkali resistant, and its advanced acrylic technology formulation allows for application to residential, commercial, architectural, and light industrial areas. It is easy to apply and meets low VOC standards.

  • 100% Acrylic Formula
  • Smooth Satin Finish
  • Excellent Coverage
  • Excellent Weather Resistance
  • Excellent Durability
  • Fade Resistant
  • Mildew Resistant
  • Easy To Apply
Powered by Sigsiu.NET