Driveway Coatings

Below is a list of our products in this category. To view the Material Safety Data Sheet or the Product Data Sheet, please click on the corresponding link.

#IP250 Stone Age Paver & Concrete Sealer (Original)
IP-250

Stone Age Brick Paver & Concrete Sealer is a premium quality, solvent borne acrylic sealer that is designed to penetrate and seal bare cementitious substrates. Its attractive gloss finish not only enhances and darkens unsealed pavers to give them a rich "Wet Look" finish, but also provides a superior toughness and durability that protects against the penetration of moisture, oils, grease stains, and other damaging or discoloring agents.

 

Note: Do not use on Epoxy Chattahoochee or other solvent sensitive surfaces.

 

Caution: May not be compatible with all previously applied coatings. Apply a small test area to ensure product compatibility.

  • Brick Pavers
  • Stamped Concrete
  • Brick
  • Driveways
  • Decorative Stone
  • Floors
  • Concrete Chattahoochee
  • Garage Floors
  • Walkways
  • Patios
  • Excellent Penetration
  • Excellent Sealing
  • Waterproofs
  • Excellent Adhesion
  • Excellent Toughness & Durability
  • Resists Hot Tire Pick-Up
  • Resists Chemical Staining
  • Non-Yellowing
  • Resists UV Light
  • Easy To Apply
#IP252 Stone Age Paver & Concrete Sealer (High Solids)
IP-250

Stone Age High Solids Brick Paver & Concrete Sealer is a premium quality, solvent borne acrylic sealer that is designed to penetrate and seal bare cementitious substrates. Its attractive gloss finish not only enhances and darkens unsealed pavers to give them a rich "Wet Look" finish, but also provides a superior toughness and durability that protects against the penetration of moisture, oils, grease stains, and other damaging or discoloring agents.

 

NOTE: Not recommended as a re-seal on previously sealed surfaces. For re-seal type applications, it is recommended to use Infiniti’s #255, Stone Age Re-Seal Brick Paver & Concrete Sealer.

 

Caution: May not be compatible with all previously applied coatings. Apply a small test area to ensure product compatibility.

  • Brick Pavers
  • Stamped Concrete
  • Brick
  • Driveways
  • Decorative Stone
  • Floors
  • Concrete Chattahoochee
  • Garage Floors
  • Walkways
  • Patios
  • Excellent Penetration
  • Sealing
  • Waterproofs
  • Excellent Adhesion
  • Excellent Toughness & Durability
  • Resists Hot Tire Pick-Up
  • Resists Chemical Staining
  • Non-Yellowing
  • Resists UV Light
  • Easy To Apply
#IP255 Stone Age Paver & Concrete Re-Sealer
IP-255

Stone Age Re-Seal Brick Paver & Concrete Sealer is a specially formulated solvent borne acrylic sealer designed for application to previously sealed brick pavers and cementitious substrates which have faded or lost their luster over time. Formulated to penetrate and re-seal, it enhances the pavers to give them that same rich "Wet Look" finish. It provides a superior toughness and durability that protects against the penetration of moisture, oils, grease stains, and other damaging or discoloring agents. For Exterior Use Only!

 

Note: Do not use on Epoxy Chattahoochee or other solvent sensitive surfaces.

 

Caution: May not be compatible with all previously applied coatings. Apply a small test area to ensure product compatibility.

  • Brick Pavers
  • Stamped Concrete
  • Brick
  • Driveways
  • Decorative Stone
  • Floors
  • Concrete Chattahoochee
  • Garage Floors
  • Walkways and Patios
  • Excellent Penetration
  • Excellent Sealing
  • Excellent Adhesion
  • Excellent Toughness & Durability
  • Resists Hot Tire Pick-Up
  • Resists Chemical Staining
  • Non-Yellowing
  • Easy To Apply
#IP261 Stone Age Concrete Stain

IP-261

Stone Age Concrete Stain is a durable concrete stain that, when properly applied, penetrates deep into the cementitious substrate to seal and waterproof the surface. It is fast drying, provides superior wear resistance, weatherability and protects the surface from excessive powdering, staining and water intrusion. It applies easily and may be applied over existing concrete stains and sealers. Not recommended for previously painted surfaces. COLORS: White, Clear, Deeptone & Ultra-Deeptone Tint Bases, and 10 Stock Colors.

 

Special Note: When applying lighter colors to driveways, carport and garage floors, tire tracking may occur. Finish may become slippery when wet. The use of a non-skid additive, such as Infiniti’s Stone Age Non-Skid Additive, is recommended to enhance anti-slip safety.

  • Patios
  • Walkways
  • Driveways
  • Garage Floors
  • Balconies
  • Pool Decks
  • Tennis Courts
  • Decorative Brick
  • Masonry Walls
  • Carports
  • Warehouse Floors
  • Solvent Acrylic Formula
  • Prevents Moisture Penetration
  • Resists Staining
  • Superior Wear Resistance
  • Superior Weather Resistance
  • Easy To Apply
#IP45-00 Stone Age Driveway Coating
IP-45-00

Stone Age Driveway Coating is a special 100% acrylic waterborne coating specifically designed for application to properly prepared driveways, floors and walkways. Its special formulation provides excellent hardness, durability, and weather resistance. Its smooth low sheen finish resists cracking, peeling and chipping, is mildew resistant, applies easily, and may be applied to previously painted surfaces. For Interior & Exterior Use! COLORS: White/Pastel, Midtone, Deeptone & Ultra-Deeptone Tint Bases, and 11 Stock Colors.

 

NOTE: This finish may become slippery when wet. The use of a non-skid additive, such as Infiniti’s Stone Age Non-Skid to ensure an anti-slip, and safe walking environment is recommended.

  • Driveways
  • Walkways
  • Stairways
  • Catwalks
  • Garage & Carport Floors
  • Patios
  • Pool Decks
  • Loading Docks
  • 100% Acrylic Formula
  • Excellent Hardness & Durability
  • Resists Fading
  • Resists Chipping & Peeling
  • Excellent Coverage
  • Excellent Product Versatility
  • Easy To Apply
Powered by Sigsiu.NET