Specialty Coatings

Below is a list of our products in this category. To view the Material Safety Data Sheet or the Product Data Sheet, please click on the corresponding link.

#IP 99 Great White 100% Silicone Roof Coating

IP-99 5

Great White 100% Silicone Roof Coating is a high solids, silicone-based protective roof coating designed to seal and create a watertight barrier that protects against leaks, ponding water, and the damaging effects of severe weather. Formulated from durable inorganic silicone resins, and reflective pigments, it provides excellent adhesion, effectively eliminates leaks, and provides a seamless waterproof barrier that can expand and contract. It offers excellent durability, is breathable, and a finish that is watertight and weatherproof. It may be applied to a variety of properly prepared roofing surfaces, enhances roof reflectivity and UV resistance, and is a cost effective alternative to roof replacement.

  • 100% Silicone
  • Excellent Coverage
  • Excellent Adhesion
  • Excellent Durability
  • Moisture-Cure
  • UV Resistant
  • Waterproof Barrier
  • Low VOC
#IP220 PC3 Fibred Knite Grade Elastomeric Patch
IP-220

PC3 Fibred Knife-Grade Elastomeric Patch is a premium quality elastomeric patching compound that exhibits outstanding adhesion, strength, and flexibility. The tough, durable and resilient membrane demonstrates excellent weathering characteristics, and is superb for use on a variety of interior and exterior repair work.

  • Masonry
  • Stucco
  • Concrete
  • Brick
  • Cement Block
  • Cement Board
  • Previously Painted Surfaces
  • Acrylic Formula
  • Excellent Adhesion
  • Promotes Finish Coat Adhesion
  • Reduces Surface Porosity
  • Low VOC
  • Excellent Product Versatility
  • Soap & Water Clean-Up
#IP248 Oil & Grease Remover

IP-220

Is unlike any industrial degreaser on the market today. Its superior degreasing power comes from a patented ingredient that safely lifts grease from any surface without the use of solvents. As such, it easily removes petroleum-based oils, vegetable and animal fats, along with dirt, protein, soils and more. Oil and Grease Remover encapsulates each hyrocarbon molecule, effectively lifting it away from the surface. It's concentrated formula means that a little goes a long way, which makes it easy to use on a variety of surfaces, and it is non-toxic.

  • Nuetral pH Formula
  • Non-Solvent
  • Non-Toxic
  • Cuts Animal Fats
  • Lifts Grease & Oils
  • Cuts Vegetable Fats
  • Low Foam
  • NSF Certified
  • Concentrated
  • Easy To Use
#IP249 Masonry Cleaner & Efflorescence Remover

IP-220

Is a specially formulated 100% acid free masonry cleaner and efflorescence remover. It is not only the world's strongest masonry cleaner, it is also the safest. Independent test confirms that its synthetic acid formula dissolves more calcium carbonate and efflorescence than muriatic, (hydrochloric) or phosphoric acid base cleaners, which are also harmful. It will safely and quickly clean pavers, brick, concrete, river rock, architectural concrete and retainer walls while dissolving all signs efflorescence. It is color safe, non-fuming and is safe for use in and around food processing and equipment areas. It is 100% biodegradable, water soluble, non-flammable, non-toxic and easy to use.

  • 100% Acid Free Formula
  • Removes Efflorescence
  • Non-Corrosive
  • Stronger than Muriatic
  • Non-Fuming
  • Non-D.O.T Regulated
  • 100% Biodegradable
  • Safe on Glass
  • Safe on Plants & Skin
  • Non-Toxic
#IP25-00 Pool-Kote Chlorinated Rubber Swimming Pool Paint
IP-25.00

Pool-Kote Chlorinated Rubber Swimming Pool Paint is a high performance chlorinated swimming pool paint designed to provide a rich and colorful finish to both new and old concrete swimming pools. Its special formulation resists softening, chipping and peeling, and is alkali resistant. Easy to apply, it provides excellent coverage that is self-priming, and resists chemical actions of chlorine and shock treatments. It resists marring, the growth of algae and fungus, lime and extreme temperature fluctuations.

 

NOTE: Not For Use In Spas, Whirlpools, Vinyl Lined Pools, Metal Pools, or Pools Previously Painted With Epoxy Pool Coatings.

  • Concrete
  • Marcite
  • Gunite
  • Concrete
  • Ponds
  • Water Fountains
  • Plaster Lined
  • Fresh & Salt Water
  • Previously Painted
  • Chlorinated Rubber Formula
  • Self-Priming
  • Excellent Chemical Resistance
  • Fungus & Algae Resistance
  • Excellent Durability
  • Alkali Resistant
  • Resists Chipping, Peeling & Marring
  • Excellent Durability
#IP26-00 Pool-Kote Waterborne Acrylic Swimming Pool Paint
IP-26.00

Pool-Kote Waterborne Acrylic Swimming Pool Paint is a specially formulated, new generation waterborne acrylic emulsion pool paint the can be applied to most existing pool coatings, as well as bare concrete and plaster pools. It is easy to apply, provides excellent coverage, is self-priming, and resists the chemical actions of chlorine and shock. It has excellent color retention, dries and cures quickly, is alkali resistant, and cleans up with water, making it ideal for the homeowner. For Interior & Exterior Pools!

 

NOTE: Not For Use In Spas, Whirlpools, Vinyl Lined Pools, Metal Pools, or Pools Previously Painted With Chlorinated Rubber or Epoxy Pool Coatings.

  • Concrete
  • Plaster Lined
  • Gunite
  • Marcite
  • Fresh & Salt Water Ponds
  • Water Fountains
  • Waterborne Acrylic Formula
  • Excellent Coverage
  • Self-Priming
  • Alkali Resistant
  • Excellent Chemical Resistance
  • Fade Resistant
  • Easy To Apply
#IP27-00 Pool-Kote Epoxy Pool Paint
IP-27.00

POOL-KOTE Epoxy Swimming Pool Paint is a specially formulated two component polyamide gloss epoxy paint designed to provide a tough durable finish for swimming pools that is self-priming, abrasion resistant and provides excellent chemical resistance. Easy to apply, its high build formula provides excellent coverage, can be applied over most other epoxy pool coatings, is excellent for spas and whirlpools, as well as concrete, gunite and marcite pools. It resists extreme temperature changes, algae growth, and is excellent for indoor pools.

 

POOL-KOTE Epoxy Swimming Pool Paint may be used on the following properly prepared substrates:

  • Concrete
  • Plaster Lined
  • Gunite
  • Marcite
  • Fiberglass
  • Whirlpools
  • Hot Tubs
  • Cement Ponds
  • Water Fountains
  • Metal Pools
#IP290 Latex Traffic Marking Paint
IP-290

Acrylic Traffic Paint is a premium quality, acrylic latex emulsion coating that is specially formulated to resist road oils, water and salts, which are commonly used for removing ice from roadways. It provides excellent coverage, adhesion, durability, and visibility for road ways, crosswalks, safety zones, etc.. Once applied and while still wet, specially designed glass beads may be sifted onto the coating immediately after application to obtain a more reflective value, and to improve night visibility. Formulated to meet Federal Specification TT-P-1952B for quality and performance. COLORS: White, Yellow, Blue, Black, and Red.

  • All Roadways
  • Parking Lots
  • Loading Docks
  • Crosswalks
  • Curbs
  • Factories
  • Parking Garages
  • Safety Zones
  • Airport Runways
  • Acrylic Formula
  • Excellent Coverage
  • Excellent Adhesion
  • Excellent Durability
  • Promotes Better Road Visibility
  • Resists Road Oils & Salts
  • Fast Drying
  • Resists Asphalt Bleeding
  • Low VOC
#IP30 Level 5 Latex Drywall Surfacer
IP-30

Level 5 Latex Drywall Surfacer is a specially formulated drywall primer/surfacer specifically designed to provide a "Level 5" smooth primer finish of approximately 10 - 15 mils dry film thickness - (DFT) to interior walls creating a smooth surface for the application of recommended finish coatings. Easy to use, it provides excellent sealing properties, coverage, helps hide or minimize surface imperfections, is self leveling, and promotes excellent sanding properties. For Interior Use Only!

  • Acrylic Formula
  • Level 5 Finish
  • Hides Surface Imperfections
  • Self-Leveling
  • Excellent Sanding Properties
  • Easy To Apply
#IP33 Knock Down Texture Flat Finish
IP-33

Knock Down Acrylic Texture Flat Finish is a texture coating that is designed to provide a "Knock Down" texture finish to a variety of interior wall surfaces. This non-aggregated coating provides a tile-like hard and durable finish that is highly breathable, non-yellowing, helps hide or minimize surface imperfections, and is easy to apply. It may be applied to both new and previously painted surfaces, are an attractive alternative to wall covering, and are great for residential, commercial, architectural and institutional uses. For Interior Use Only!

  • 100% Acrylic Formula
  • Excellent Durability
  • Tile-Like Hard Finish
  • Decorative Properties
  • Hides Surface Imperfections
  • Mildew Resistant
  • Easy To Apply
#IP34 Knock Down Texture Satin Finish
IP-34

Knock Down Acrylic Texture Satin Finish is a texture coating that is designed to provide a "Knock Down" texture finish to a variety of interior wall surfaces. This non-aggregated coating provides a tile-like hard and durable finish that is highly breathable, non-yellowing, helps hide or minimize surface imperfections, and is easy to apply. It may be applied to both new and previously painted surfaces, are an attractive alternative to wall covering, and are great for residential, commercial, architectural and institutional uses. For Interior Use Only!

  • 100% Acrylic Formula
  • Excellent Durability
  • Tile-Like Hard Finish
  • Decorative Properties
  • Hides Surface Imperfections
  • Mildew Resistant
  • Easy To Apply
#IP8000 Latex Field Marking Paint
IP-8000

Latex Field Marking Paint is a concentrated heavy duty vinyl acrylic coating specifically designed for use as a line striping paint for all types of playing fields. It is non-toxic, non-irritating to eyes or skin, and will not harm grass. When properly mixed and applied, it provides crisp color distinction, and excellent coverage to dry surface grasses for lasting design effects and resistance to wear. Colors: White and 9 Factory Colors

  • Non-Toxic
  • Concentrated
  • Heavy Duty
  • Wear Resistant
  • Excellent Coverage
  • Wear Resistant
  • Non-Irritating
  • Easy To Apply
#IP81 Elastomeric Patch, Textured Knife Grade
IP-81

Elastomeric Patch Textured Knife Grade Patching Compound is formulated as a positive patching system for the permanent repair of cementitious substrates such as, stucco and masonry cracks and surface damage. It will also adhere to most any clean surface. It is designed to maintain maximum flexibility through a wide range of temperature changes with minimal shrinkage and provide long term durability. Provides maximum resistance to wind driven rain and is mildew resistant. For Interior and Exterior use!

  • Masonry
  • Stucco
  • Concrete
  • Brick
  • Cinder Block
  • Wood
  • Ferrous & Non-Ferrous Metals
  • Drywall
  • 100% Acrylic Formula
  • Permanent Repair
  • Excellent Elasticity
  • Minimal Shrinkage
  • Excellent Low Temperature Flexibility
  • Excellent Product Versatility
  • Easy To Apply
#IP82 Elastomeric Patch, Textured Brush Grade
IP-82

Elastomeric Patch Textured Brush Grade Patching Compound is formulated as a positive patching system for the permanent repair of cementitious substrates such as, stucco and masonry cracks and surface damage. It will also adhere to most any clean surface. It is designed to maintain maximum flexibility through a wide range of temperature changes with minimal shrinkage and provide long term durability. Provides maximum resistance to wind driven rain and is mildew resistant. For Interior and Exterior use!

  • Masonry
  • Stucco
  • Concrete
  • Brick
  • Cinder Block
  • Wood
  • Ferrous & Non-Ferrous Metals
  • Drywall
  • 100% Acrylic Formula
  • Permanent Repair
  • Excellent Elasticity
  • Minimal Shrinkage
  • Excellent Low Temperature Flexibility
  • Excellent Product Versatility
  • Easy To Apply
#IP83 Elastomeric Patch, Smooth Brush Grade
IP-83

Elastomeric Patch Smooth Brush Grade Patching Compound is formulated as a positive patching system for the permanent repair of cementitious substrates such as, stucco and masonry cracks and surface damage. It will also adhere to most any clean surface. It is designed to maintain maximum flexibility through a wide range of temperature changes with minimal shrinkage and provide long term durability. Provides maximum resistance to wind driven rain and is mildew resistant. For Interior and Exterior use!

  • Masonry
  • Stucco
  • Concrete
  • Brick
  • Cinder Block
  • Wood
  • Ferrous & Non-Ferrous Metals
  • Drywall
  • 100% Acrylic Formula
  • Permanent Repair
  • Excellent Elasticity
  • Minimal Shrinkage
  • Excellent Low Temperature Flexibility
  • Excellent Product Versatility
  • Easy To Apply
#IP84 Elastomeric Patch, Smooth Knife Grade
IP-84

Elastomeric Patch Smooth Knife Grade Patching Compound is formulated as a positive patching system for the permanent repair of cementitious substrates such as, stucco and masonry cracks and surface damage. It will also adhere to most any clean surface. It is designed to maintain maximum flexibility through a wide range of temperature changes with minimal shrinkage and provide long term durability. Provides maximum resistance to wind driven rain and is mildew resistant. For Interior and Exterior use!

  • Masonry
  • Stucco
  • Concrete
  • Brick
  • Cinder Block
  • Wood
  • Ferrous & Non-Ferrous Metals
  • Drywall
  • 100% Acrylic Formula
  • Permanent Repair
  • Excellent Elasticity
  • Minimal Shrinkage
  • Excellent Low Temperature Flexibility
  • Excellent Product Versatility
  • Easy To Apply
Powered by Sigsiu.NET